This is a cache of https://vccplus.brianholman.com/hardware/releases/1.0.0/. It is a snapshot of the page as it appeared on 2026-11-21T00:01:53.993+0000.
Coco 3 Plus 1.0.0 release notes · VCC Plus

Coco 3 Plus FPGA · Version 1.0.0

Hardware overviewHardware downloadsMove your softwareView quick-start PDF

Coco 3 Plus 1.0.0

Coco 3 Plus brings a dedicated Color Computer experience to DE10-Nano MiSTer hardware, with four configurable cartridge slots and menus organized around the way you use the machine.

What is included

  • Four configurable Multi-Pak slots. Choose slot devices independently and select the startup slot. Mounted media follows its built-in device.
  • Nine organized menu pages. Cartridges, floppy disks, CoCo SDC, sound and expansion, cassette, machine, display, input and advanced settings each have a consistent home. Existing disk, cassette and advanced controls are retained.
  • Sound & Speech support. The cartridge’s controller, speech and sound logic uses the original firmware. Both chip ROMs are included in the complete image.
  • Stereo Orchestra90 and an extended palette. The menu lets you switch between Sound & Speech and Extended palette.
  • Updated timing and reset handling. Includes clock, reset and memory changes to the FPGA core.
  • A dedicated-card route. The image contains assembled BASIC ROMs, the branded MiSTer menu and three website-sourced games: Quadrapassel, Capital Quest and Bone Quest. Each game includes its player guide. The initial Quadrapassel working disk is prepared in drive 0 for the DOS command.
  • A build and installation route. Windows scripts and documentation support Quartus builds, ToolShed-based BASIC ROM assembly, packaging and installation using passwordless SSH.
  • Software transfer and diagnostics. The complete SD image turns on network file sharing, includes a MySoftware folder and comes with Sound Lab. The software-transfer guide covers Windows, Mac and using a card reader.

Hardware and compatibility

The reference system is a Terasic DE10-Nano MiSTer with 128 MB SDRAM, powered USB hub, primary 64 GB microSD card, HDMI display and USB keyboard. The reference I/O board also provides analog audio. Ethernet is optional for local play.

Install or update

For a new dedicated setup, write the complete IMG to a spare microSD card. Keep your original working card for rollback. Writing replaces the target card; it does not merge saved games or settings from another card.

For an existing MiSTer, back up your card and use the prebuilt existing-card ZIP and copy instructions. No Quartus build or card reimaging is required. Supply your own matching boot ROMs and optional SSC ROMs; preserve existing settings, other cores and working disks. This ROM-free ZIP contains the same FPGA core as the complete card image.

Developers can find the source and build instructions on the Downloads page.

Downloads and file checksums · Card-writing instructions · Menu reference

First start

Allow up to five minutes for the first boot. If the MiSTer menu or CoCo BASIC screen has not appeared, power the machine off and on once.

At Disk BASIC, type DOS and press Enter to start the prepared Quadrapassel disk. Choose another game through F12 > Floppy Disks > Drive 0 > StandardGames.

Copyright © 2026 Brian K. Holman. Original project and component notices remain with their corresponding source and distribution materials.

A closer look

Open original